Apr 242015
 

It was an evening in March. The Cape had been burning, with mountain fires raging across the Peninsula. We were on the terrace of a mansion in Kommetjie watching the sun set over the Atlantic.  Craft beer was in hand while crayfish samoosas and roasted pork belly made up the nibbles. South African rap performer Jack Parow was giving  a sunset performance. That was the wrap party for the SABC 2 Afrikaans TV lifestyle show Pasella’s programme on Kommetjie, which was broadcast in late March. The programme featured my wood surfboards. You can watch the full clip below, if you’re interested.

  • Pasella, features Burnett Wood Surfboards (starts at 17 minutes, 10 seconds)

[embedplusvideo height=”550″ width=”695″ editlink=”http://bit.ly/1Pj52QZ” standard=”http://www.youtube.com/v/TvcTp7XHe14?fs=1″ vars=”ytid=TvcTp7XHe14&width=695&height=550&start=&stop=&rs=w&hd=0&autoplay=0&react=1&chapters=&notes=” id=”ep3408″ /]

There were two funny asides to the Pasella experience. The first was when I agreed to do the programme and said confidently that speaking in Afrikaans would be no problem. Of course once I was in front of the camera it was another matter and as a result I’m the only person that speaks English in the programme. Eventually the poor producer just gave up and asked me to speak in English.

The programme was aired on a Friday night and by Monday morning I’d forgotten about it. First stop of the morning was the local hardware store. The cashier looked up at me and her face lit up as she exclaimed: “You’re the man from the television.” It was the same at the other hardware store I visited on the same day. It was a cool talking point. Anyway, enough waffling.

Mar 162015
 
GraemeHempBoard

Graeme with his twin keel fish glassed in hemp and bio-resin.

Here’s a board that breaks new ground in the realm of sustainable surfboard construction.

Made by Graeme on a Burnett Wood Surfboard course, an estimated 85% of this hollow wood surfboard is made out of locally-grown wood (meaning lower transport emissions because of reduced transport emissions).

It’s glassed with natural hemp cloth from the awesome folk at The Hemporium right here in Cape Town, and glassed with Entropy Super Sap epoxy, a resin that uses a bio-based additive rather than a petroleum-based additive.

There is no such thing as a “100% green surfboard”, but using materials like those above we can significantly reduce the carbon emissions and thus environmental impact of our surf lifestyle.

One study has shown, for example, that a hollow wood surfboard has less than half the carbon emissions of a foam equivalent, and that it is without considering the added benefit of glassing with a natural material and bio-resin.

Huge credit to Graeme for being so keen to break new ground. He was sold on the idea of glassing in hemp and using the Entropy product, which had only just become available in South Africa when we glassed this board last year.

All our hollow wood boards are now being glassed and finished with Entropy resin. The use of hemp is available on request.

 

 

 

GraemeHempBoard3

Glassing with hemp fabric.

GraemeHempBoard2

Graeme building his hollow wood surfboard.

Feb 122015
 

Nearly two years ago, Peter and Jennifer arrived at my front door to look at a hollow wooden fish they were interested in buying. We had a good chat about wood boards, life and the like. A few days later Jennifer phoned and said Peter would like to come around with his crew and film the wood boards I was making. That’s how Peter, Jennifer, Adam and Jules came to spend two days in a garage in Fish Hoek, which at the time was where I made my hollow wood surfboards.

I’ve often thought about those days of filming because of the moment in time they captured. Shortly afterwards I moved to a workshop in Kommetjie, the business grew, things got crazy and the garage became an unused storage place that nobody ever entered. In the last few weeks I’ve moved my workshop from Kommetjie to Scarborough, but I’m fixing up my garage work space so that I can spend some days working at home, picking up the kids, cooking meals and doing all those kind of homely things that one doesn’t do when spending all your time in a workshop obsessed with making wood surfboards. So it’s sort of as if I’ve done something of a circle. The film the crew made can be watched below. It was shown at the 2014 Wavescapes Surf Film Festival held in Cape Town. So much thanks to everyone who was involved and hope to hook up again soon.




Jan 182015
 

2015 has gotten off to a rocking start with a run of exceptional summer swells lighting up the Cape Peninsula surf spots. After a hectic end to the year in the wood surfboard building workshop, I took it slow for the first week of January, but have stepped up a gear in the last few days. The year is starting with some Saturday course building – Ant and Gero got started on Saturday and will be building their boards on Saturday’s up to the end of February. And tomorrow, Ian and Amanta will be building their boards on a six-day course.

2015 is an exciting year for Burnett Wood Surfboards. Apart from our usual hollow wood surfboards and custom wood surfboard builds, I will, for the first time be offering Stand Up Paddleboard (SUP) course options. More details to follow. I will also be introducing a range of other course offerings. In the meantime, below are some pictures from the workshop taken at the end of last year and beginning of this year.

single

6′.8″ single fin.

9′.8″ longboard.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5′.7″ twin-keel custom fish.

 

Aug 192014
 

What an awesome week of hollow wood surfboard building.

Our August course ran from 11-17 August and four boards were built: two 9′.7″ longboards and two 6′.4″ eggs. The guys participating built amazing boards and each one is a functional work of art in its own right. It was such a stoke to work with everyone and see the boards coming together. What really struck me about this course was the way everyone helped each other. It was a great vibe and I’d like to thank Craig, Norman, Peter and Matthew for making the week a successful one.

Here are some pictures from the week. If you want to join up and build your own board, have a look at our courses page or drop me an email on burnett.patrick@gmail.com

locationdoctors

 

 

 

 

 

 

 

 

 

 

 

 

 

normcraig

 

 

 

 

 

 

 

 

 

 

 

 

clampup

planing

Jul 062014
 

Picture: Dougal Paterson, www.dougalpaterson.com

Up until now, if you wanted to build one of our hollow wood surfboards you needed to sign up for a week-long course. For many people who would like the experience of building their own board, it’s hard to take a full week.

The six-day course is still available. But we have also added a three-day hollow wood surfboard building course where all it takes is a Friday, Saturday and Sunday for you to experience building your own wood surfboard.

We’ll still retain the core of our week-long course offering and you’ll experience the satisfaction of working with wood in crafting your own beautiful, functional wave craft.

But instead of starting at the beginning, part of your board will already be built for you when you begin, enabling you to come in and work on the most crucial and rewarding parts.

The first three-day course will run 19-21 September 2014. To book your spot, contact Patrick through burnett.patrick@gmail.com or 073 232 3043 to sign up or for more information.

What you get:

– Your own beautiful, surfable wood surfboard, handmade by yourself

– Access to all tools and provision of materials needed to make your surfboard

– Information on wood surfboards, history, design dynamics, environmental credentials

– Tuition and assistance

– Glassing and finishing of the board

– Fin boxes or handmade wood fins

– Tea/Coffee throughout the day

– Lunch on the days that you build

– Experience of working with wood and craft in a stunning rural environment

– The chance to meet other like-minded folk also building their own boards.

To see our picture gallery of people who have built their own boards, click here. For more information, click here.

Contact Patrick through burnett.patrick@gmail.com or 073 232 3043 to sign up or for more information.

 

 

 

 

 

 

Jun 082014
 
IMG_1121

Picture: Dougal Paterson, www.dougalpaterson.com

Out in a packed line-up recently and the only surfer on a wooden surfboard, I jokingly quipped that everyone else was destroying the planet. “Aren’t we all,” came a cynical reply. The answer to that comment is, yes we are.

News circulated last year about a green surfboard verification programme. The initiative comes from Southern California outfit Sustainable Surf, a non-profit start-up NGO. A report on the initiative notes that petroleum, polyurethane, polyester resin, polystyrene foam, PVC and many other substances are still being widely used to produce surf gear and equipment. Tell us something we don’t already know. Continue reading »

Apr 222014
 

1. 5′.8″ classic-styled hollow wood twin-fin fish

abalonefish20130910_172129This is a just-finished 5′.8″ classic-styled hollow wood twin-fin fish in Western Red Cedar and Obeche with real abalone inlays and custom-made glass-on fins. It’s a celebration of a surfboard shape that has endured for nearly 50 years. Handcrafted and taking inspiration from the fish shapes of the early 1970s, the special feature of this board are the abalone inserts along the bottom that separate the two different types of wood, the one light and the other dark in colour. The abalone lines have a mother-of-pearl luminosity to them that is accentuated by the rich colours of the wood. This is a one-of-a-kind board, a piece of functional art. This board was made as a piece of wall art, but it is ready to be surfed. Despite being shorter than today’s typical shortboards, the fish paddles beautifully and catches waves easily. It gives a loose, fast, floaty ride that feels completely different to a modern surfboard.  And despite it’s stability, it’s got X-factor, loads of it.                                                           

PRICE: R8,500, excluding shipping. Contact burnett.patrick@gmail.com for more  information

 

2. 9′.7″ single fin hollow wood longboard (sorry this one has been SOLD, but contact me if you would like one made)

topnose_deckThis is a 9′.7″ single fin hollow wood longboard made out of Western Red Cedar with Obeche accent strips. Handcrafted, this board draws inspiration from classic longboards from a bygone era, with a rolled bottom, pinched rails and hips through to a square tail.

The special features of this board are the use of premium Western Red Cedar, a tree native to the Pacific North West in North America with a long history of use in boat building by indigenous people in that part of the world. The wood for this board was hand-selected to show off the finest grain the species has to offer – it is a rich, dark brown colour, alternating from a fine, straight grain to a swirling grain from tail to nose. The board also has an interesting tail block lay-up, alternating triangles of light and dark wood to create a stylish finish.

This board will make a stunning feature on any wall, but it is also very surfable. Spend enough time learning its moods and you’ll be rewarded with some lengthy nose rides.

PRICE: R9,500, excluding shipping. Contact burnett.patrick@gmail.com for more information

tailrail-rockerbottomnose_full length

 

Apr 062014
 

Picture by Dougal Paterson, www.dougalpaterson.com

Paul, who built his own 6′.0″ hollow wood fish out of Western Red Cedar, told me a story the last time he was at the farm that relates to board building and working with your hands. The daughter of a friend of his had started doing craftwork and had described the process of working with her hands as taking her to a place where she was neither happy nor sad, just there.

If that sounds zen-like, it is. I’ve often completely lost myself in the making of a board and I know guys that have built their own boards with me have felt something similar.

Building hollow wood surfboards is so much about a process. It can take a week of full-time labour. So, the question arises, why engage in something that takes such a long time? What is it about working with wood and building surfboards? Continue reading »

Feb 132014
 

The end of 2013 and beginning of 2014 was busy, busy. I was fortunate to have some amazing custom board orders. These are pictures of hollow wood surfboards made by Burnett Wood Surfboards towards the end of 2013 and beginning of 2014. Thanks to the wonderful customers I had who put in their orders and waited patiently for delivery.

Latest Boards 2013/2014

Hollow wood surfboards made by Burnett Wood Surfboards around the end of 2013 and beginning of 2014.